The Domain Name System (DNS) is a hierarchical decentralized naming system for computers, services, and other tools connected to the Internet or a private network. This system translates hostnames. An illustration of a hostname is https://dnsservernotresponding.org/. An IP address looks like this: 104.18.42.131. We wanted to visit, if DNS didn’t exist, browsing the net would not be easy, since we’d need to enter IP addresses. It’s easier to recall dnsservernotresponding.org than 104.18.42.131, true that applies to every page on the web.

DNS servers are used, since it is more easy for us to understand and recall words but also because computers will need to use IP addresses to get sites. There is A DNS server like a translator between the hostname and an IP address. Furthermore, computers shop DNS responses anyplace, so the DNS request doesn’t occur every time you connect that you have previously seen. As soon as the IP address associated it using a domain name has been determined by your computer, it is going to recall that for a period of time. By skipping the DNS request interval this allows improved connection speeds.

If you connect a device to your home network or other system with Internet access that the online connection can fail with a”DNS server is not responding” error. There might be many reasons for this. DNS issues can be fixed by you by resetting your router, disabling extra connections, flushing the DNS cache, altering your computer’s default DNS server, and troubleshooting your present connection.

In this article, we describe possible solutions to this”DNS server isn’t responding” error you can be able to utilize to resolve the issue.

Change The DNS Server

If there’s a problem with your own IP DNS server, you may attempt to change your DNS host to Google’s Public DNS, a free alternative Domain Name System (DNS) service provided to Internet users across the world. Servers and the DNS service are maintained and owned by Google. It acts as a recursive name server providing domain name resolution for any host online. You’ll need to alter the DNS manually, and then we show you how.

To alter your DNS server to the DNS server of Google, go to your Network Connections settings. Right-click that the Start menu and then choose”Network Connections”, or go to Settings and click” Network & Internet”.

Right-click the Start menu and select "Network Connections"

In the Network & Internet settings window, choose your connection type (in our situation,”Ethernet”) on the left sidebar and then click”Change adapter options” on the ideal pane.

change adapter options

Right-click in your link and select”Properties” in the drop-down menu.

network connections properties windows10

Select”Internet Protocol Version 4 (TCP/IPv4)” and click on”Properties”.

change connection properties win10

From the Internet Protocol Version 4 (TCP/IPv4) Properties window, select”Use the following DNS server addresses”, input 8.8.8.8 as the”Preferred DNS server” and 8.8.4.4 as the”Alternate DNS server”. Click on”OK” to save changes and assess if this helps to resolve the problem with the”DNS server isn’t responding” error.

Disable IPv6

Internet Protocol version 6 (IPv6) is the most recent version of the Internet Protocol (IP), the communications protocol that gives an identification and location system for computers on networks and routes traffic across the net. IPv6 was created to manage the problem of IPv4 address exhaustion. Disabling the IPv6 feature may help to fix the”DNS server is not responding” error.

The Simplest way to disable IPv6 on the Windows operating system would be through the Sharing and Network Center. To open it, go to Control Panel and click”View network status and jobs” under”Network and Internet”.

Click on your link (in our case,”Ethernet”).

On your link status window, then click”Properties”.

In your relations properties window, locate”Internet Protocol Version 6 (IPv6)” and then unmark the checkbox to disable it. Click on”OK” to save changes and see if this helps to fix the”DNS server isn’t responding” error.

Reset Your Router

Restarting your router or modem might help to correct this problem. We suggest you try this possibility. When there is an”On/Off” button on your router, then just press it to turn off your router, wait a while, then turn it on again. When there’s absolutely no button on your router, then disconnect it. Try restarting your computer as well, when your router has restarted and see if this helps.

There might be a problem with your router configuration – this can also cause this”DNS server is not responding” error. To repair it, reset the router to its default settings. Open your router’s configuration web page and locate the”Reset” option. If you can not get into the web-based installation page of the router and you also want to reset the router to its default factory settings, press and hold the Reset button for 10 minutes. Bear in mind that resetting your router will also reset your router’s password.

Input MAC Address Immediately

A Media Access Control address (MAC address) of a gadget is a unique identifier assigned to network ports for communications in the data link layer of a network segment. MAC addresses are used as a system address including Ethernet and Wi-Fi. MAC addresses are used in the media access control protocol sublayer of the OSI reference model. All these MAC addresses are assigned by the maker of a system interface control and saved in its hardware like the card memory or other firmware mechanism. To fix the”DNS server is not responding” error, you’ll need to enter the MAC address , but you first need to find it using an elevated Control Prompt and among the commands.

Command Prompt is the input field in a user interface display, a command line interpreter application available in many Windows operating systems. It’s used to execute input, the majority of which are used perform advanced functions to automate tasks through scripts and batch files, troubleshoot and solve certain types of Windows issues. Control prompt used to be the only method to interact with the computer, so a set of controls with stiff syntax was created to perform all system capabilities. Command Prompt’s official name is Windows Command Processor . however, it is also sometimes known as the command shell or cmd prompt, or even referred to by its filename cmd.exe.

To use Command Prompt, you must enter a command. It then executes the command as entered and performs its Windows activity or function. Some controls available in Windows need you to run them in an elevated Control Prompt i.e. with administrator level privileges. The command we must use necessitates an elevated Command Prompt to be opened with administrator privileges. To open elevated Command Prompt type”command prompt” in Hunt and click on the”Command Prompt” result. Choose”Run as secretary” to run it together with administrative privileges.

When you choose”Run as administrator”, a User Account Control prompt will appear asking in the event that you allow the Command Prompt to make modifications to your computer. Click “Yes”.

Elevated Command Prompt will appear. In opened the Command Prompt window, then type the”ipconfig /all” command and press Enter on your keyboard. You will see a listing of information regarding the setup. Locate”Physical Address” and take a note of this somewhere – you may need it to move to the next step.

Now that you have your MAC address, you can configure your own system connection. To accomplish this, Right-click on the Start menu and then choose”Network Connections”, or go to Settings and then click”Network & Internet”.

In the Network & Internet preferences window, choose your connection type (in our situation,”Ethernet”) on the left pane and click “Change adapter options” on the right pane.

Right-click on your link and select”Properties” in the drop-down menu.

From the Properties window, then select”Client for Microsoft Networks” (it should be selected automatically) and click on”Configure”.

Now select the”Advanced” tab and then select”Network Address” below”Property:” Select”Value:” on the ideal pane and enter the MAC address (Physical Address), which you received when you entered the”ipconfig/ all” command in Command Prompt.

Click on”OK” to save the changes and see if this helps to resolve the”DNS server is not responding” error. There is a chance that it will be fixed before entering the address manually if you used Google DNS.

Leave a Reply

Your email address will not be published. Required fields are marked *